Supreme Bonder

Regular price $35.00 Sale price$21.00 Save 40%
Tax included. Shipping calculated at checkout.

Our bonder has been developed to increase the elasticity to your adhesives. The bonder cures from the outside to the inside of the bond, preventing extension turning white from shocking curing. Our bonder is made in accordance with UK cosmetics regulation and is EU compliant. It helps reduce fumes and irritation.

 Products details:

  • 15ml
  • Do not use on client’s skin
  • Make in UK
  • Must be used at room temperature


  • Before use, make sure bonder is used at room temperature. Bonder will be viscous when cold and must be warmed to room temperature and mixed prior to use.
  • After the lash extension has been applied, you need to wait 2-3 minutes, and then take a micro brush and apply a very small amount of bonder, only at the joint. Please do not soak the lashes.
  • And most important step: let the bonder set! Don’t rush to use a fan or nano mister immediately after applying.

Liquid products, inclusive adhesive, bonders and cream based products cannot be returned. If you are not happy with your purchase please contact our customer service via email at



MSDS |MATERIAL SAFETY DATA SHEET                                  

Section 1 – Chemical Product and Company Identification



Supreme Bonder






15 Peerless Court

Avondale Heights

Victoria 3034 Australia

0415 217 186


Creation date: 05/01/2023

Product use: Adhesive cure aid



Section 2 – Composition and Ingredient Information


Ingredient Component Name

Humectants(e.g Glycerine) 10%

Emollients e,g, Peg-7 glyceryl cocoate) 5%

Bulking agents (e.g. Sodium polyacrylate) 5%

Additional ingredients (e,g vitamins, proteins, plant extracts 5%

Emulsifying agents (e.g Ethylhexyl stearate) 5%

Thickeners (e.g. Cellulose derivatives) 5%

Preservatives, antimicrobials 1.5%

Aqua Water to 100%

Proprietary blend

Ethanol containing solution

Section 3 – Hazards Identification   

Hazard Risk Classification


Category 2 for skin and eye irritation

Potential Health Effect

Eye: Causes eye irritation

Skin: Causes skin irritation

When used properly the product is safe and tolerable in accordance with the legal provisions (Article 3 of the EC Cosmetics Directive.)




Section 4 – First Aid Measures



Not expected

Eye Contact

Inadvertent contact with eyes:rinse thoroughly with plenty of lukewarm water immediately;if irritation persists consult ophthalmologist  as a precautionary measure


Skin Contact

Gently wash with mild soap and water. If irritation occurs, seek medical attention. If clothing is contaminated, remove and wash before reuse



Drink plenty of water. Seek medical attention.


Inadvertent ingestion of larger amounts, do not induce vomiting. Rinse out of your mouth and drink about one glass of water. Where appropriate, consult the poison control center of the doctor.

Section 5 – Fire Fighting Measures


Specific Hazard


Flash Point


Hazardous Decomposition Materials



Suitable Extinguishing Media

All common extinguishing agents are suitable


Protective Equipment


Section 6 – Accidental Release Measures


Personal Precautions (for non-emergency and emergency responders)

Wear appropriate protective equipment. Stop leaking if without risk.


Environmental precautions

Do not bring it into the eyes. Packaging should be recycled after residual emptying. Filled, unused packages must be disposed of separately in accordance with the waste management directives of the municipality


Disposal and Clean Up

In the event of spillage/leakage, mop up the main volume with clots;when larger amounts are involved, dispose of cloths and mopping up material by controlled disposal-risk of fire. Remove rest with plenty of water and common cleaning agent


Section 7 – Handling and Storage


Handling Precautions

Avoid contact with eyes, skin, and clothing. Keep out of the reach of children

Must be used in accordance with manufacturer’s instructions. Observe any warnings on packaging. Store in a cool and dry place (room temperature) Product may be flammable. Do not expose to extreme heat (e.g. sunlight). do not store close tonaked flames or sources of heat or use in direct vicinity.



Section 8 – Exposure Controls and Personal Protection

Exposure Limits

No limit value which is to be controlled is defined

Personal Protective Equipment

Breathing protection


Not necessary

Hand protection

Body protection

No special protective gloves necessary

No special protective measures necessary

Section 9 – Physical and Chemical Properties


Physical State



Slight or characteristic



Boiling Point


Flash Point




Evaporation Rate


Ignition Temperature


Melting/Freezing Point



Water Soluble

Vapor Density


Vapor Pressure



0.97-1.01 g/ml


Section 10 – Stability and Reactivity



Stable under normal conditions.


Excess heat, ignition sources, incompatible materials.

Conditions to Avoid

None in case of correct treatment and storage

Incompatible Materials

No dangerous reactions known

Hazardous Decomposition Products

No decomposition if used correctly


Section 11– Toxicological Information


Inhalative Toxicity


Skin Irritation

May cause skin irritation

Eye Irritation

May cause irritation to eyes


No data available

Acute Toxicity

Mutagenicity, cancerogenic,reproduction toxicity

No data available

Not known


Section 12– Ecological Information



No data available


No data available

Bioaccumulative Potential

No data available

Mobility in Soil


No data available

In the case of appropriate handling and use, no ecological problems are to be expected


Section 13– Disposal Consideration


Dispose in accordance with applicable regional, national, and local laws and regulations.Packaging which cannot be cleaned has to be disposed in the same way like the substance itself


Section 14– Transport


No dangerous goods according to the transport regulations


Section 15– Regulatory Information

The product is classified according to the EC guidelines and applicable national laws.


Section 16– Other Information


All the information of Material Safety Data Sheet is provided on the basis in good faith, and is believed to be trustworthy but is for reference only. Adhesive is very complicated and the result of it much dependent on the surface material, additive, releasing agents of the substrates and the user's methods. Our company assumes no responsibility for use or reliance upon this information.  The users are responsible for selecting the suitability of the products and methods of use.



Recently viewed