Pearl Lash Adhesive

Regular price$40.00
/
Tax included. Shipping calculated at checkout.

Pearl is a quick-curing lash adhesive, curing at 0.5-1 second. It’s strong, thin and flexible.  It’s a great option if your environment is low humidity. This adhesive work best in humidity between 20-70% and temperature 20-24 C. it’s a good choice for lash artist who want a fast-drying adhesive. 

Product details:

  • 5ml bottle
  • Retention – approx. 5-6 weeks
  • Viscosity: thin
  • Humidity 20% to 75%
  • Drying time: 0.5-1 second
  • Colour: Black
  • Shelf life - opened: 4-6 weeks, unopened 6 months
  • Cruelty free never tested on animals
  • Ingredients: Ethyl-2 Cyanoacrylate, PMMA, Isobutylene/ Isoprene Copolymer, Carbon black
  • Latex free
  • 100% vegan

Recommended environment:

Ideal Temperature: 20-24 C
Under 50% humidity: 1 second cure time
50% to 75% humidity: 0.5 second cure time
Over 75% humidity: please use a dehumidifier

Storage recommendations:

  • Store in cool, dark container with a silica packet to reduce humidity
  • Unopened adhesive is good for 6 months
  • Opened adhesive is last up to 4-6 weeks. under proper storage conditions
  • Shake for two minutes before using

Warning: this product is intended for professional use only. Do not use this adhesive for self-application or to apply strip lashes.

Liquid products, inclusive adhesive cannot be returned. If you are not happy with your adhesive please contact our customer service via email at admin@envolash.com.au. 

MSDS

MSDS |MATERIAL SAFETY DATA SHEET

Section 1 – Chemical Product and Company Identification

MSDS NAME

COMPANY NAME

PEARL ADHESIVE

ENVOLASH PTY LTD

COMPANY ADDRESS

 

 

PHONE

 

Creation date: 05/01/2023

15 Peerless Court

Avondale Heights

Victoria 3034 Australia

0415 217 186

Product use: Adhesive glue for eyelash extension only.

 

 

 

 

Section 2 – Composition and Ingredient Information

 

Ingredient Component Name

Ethyl-2-Cyanoacrylate

CAS Number 7085-85-0

Concentration 82%

 

Isobutylene Isoprene Copolymer

CAS 9010-85-9

Concentration 13.5%

 

PMMA

CAS Number 9011-14-7

Concentration <1%

 

Carbon Black

CAS Number 1333-86-4

Concentration <5%

 

 

 

 

 

 

 

 

 

 

 

 

Section 3 – Hazards Identification   

Hazard Risk Classification

 

Category 1

Potential Health Effect

Eye: Irritating to eyes. Causes excessive tearing. Eyelids may bond.

 

Skin: Bonds skin in seconds. May cause skin irritation. Cyanoacrylate has been reported to cause allergic reactions   but due   to rapid    polymerization at    the   skin surface, an allergic response is rare. Cyanoacrylates generate heat on solidification. In rare circumstances a large drop will burn the skin. Cured adhesive does not present a health hazard even if bonded to the skin.

Inhalation: Exposure to vapors above the established exposure limit result in respiratory irritation which may lead to difficulty in breathing and tightness in the chest

 

Ingestion: Not expected to be harmful by ingestion. Rapidly polymerizes (solidifies) and bonds in the mouth. It is almost impossible to swallow. Existing conditions aggravated by exposure: Skin, eye, and respiratory disorders.

 

 

WARNING: MAY CAUSE EYE AND RESPIRATORY IRRITATION BONDS SKIN IN SECONDS.

 

Section 4 – First Aid Measures

 

Inhalation

Remove to open space with fresh air. Seek medical attention to treat symptomatically if discomfort persist

 

Eye Contact

Flush with water for at least 15 minutes. Get medical attention. If eyelids are bonded closed, release eyelashes with warm water by covering with a wet pad. Do not force your eyes open. Cyanoacrylate will bond to eye p\rotein and will cause a lachrymatory effect which will help to debone.

 

Skin Contact

Soak in warm soapy water. Gently peel apart using a dull instrument. If skin is burned due to the rapid generation of heat by a large drop, seek medical attention. If lips are bonded, apply warm water to the lips and encourage wetting and pressure from saliva in the mouth. Peel or roll lips apart. Do not pull lips apart with direct opposing force.

 

Ingestion

Ingestion is not likely. See supplemental page for emergency procedures.

 

 

 

 

Section 5 – Fire Fighting Measures

 

Specific Hazard

N/A

Flash Point

125℃ Tagliabue closed cup

 

Auto Ignition temperature

485℃

 

Flammable/Explosive Limits-lower%

Not determined

 

Flammable/Explosive Limits-upper%

Not determined

 

Hazardous Decomposition Materials

Carbon Monoxide, Carbon Dioxide

 

Suitable Extinguishing Media

Dry powder. Foam and Water spray. Carbon dioxides

 

Protective Equipment

Fire fighters should wear positive pressure self-contained breathing apparatus

 

Hazardous combustion products

Trace amounts of toxic and or irritating fumes may be released and the use of breathing apparatus is recommended.

 

Unusual fire or explosion hazard

None

 

 

 

Section 6 – Accidental Release Measures

 

Environmental precautions

Ventilate Area

 

Disposal and Clean Up

Do not use clothes for mopping up. Flood with water to complete polymerization and scrape off the floor. Cured material can be disposed of as non-hazardous waste

 

 

Section 7 – Handling and Storage

 

Handling Precautions

Avoid contact with eyes, skin, and clothing. Avoid breathing of vapors

 

Storage

Keep in a cool, well ventilated area away from heat

Section 8 – Exposure Controls and Personal Protection

Engineering Controls

Use positive down-draft exhaust ventilation if general ventilation is insufficient to maintain vapor concentration below established exposure limits.

 

Respiratory Protection

Use NIOSH approved respirator if there is potential to exceed exposure limits. Observe OSHA regulations for respiratory use (29 CFR 1910.134)

 

Skin Protection

Use gloves and aprons as necessary to prevent contact. Do not use PVC, nylon or cotton.

 

Eye/Face protection

Chemical splash goggles or safety glasses with side shields.

 

 

 

Section 9 – Physical and Chemical Properties

 

Physical State

Black Liquid

Odor

Sharp ,irritation

pH

N/A

Specific Gravity

1.04 @ 75oF

Boiling Point

More than 300OF

Flash Point

125Tagliabue closed cup

Flammability

1

Evaporation Rate(Ether=1)

N/A

Ignition Temperature

485

Melting/Freezing Point

N/A

Solubility

Polymerized by water

Vapor Density

Approximately 3

Vapor Pressure

Less than 0.2mm

Volatile Organic Compound(EPA Method24)

87.9%

 

Section 10 – Stability and Reactivity

 

Stability

Stable under recommended storage conditions

 

Conditions to Avoid

Spontaneous polymerization

 

Incompatible Materials

Water, amines, alkalis and alcohols

 

Hazardous Polymerization

Rapid exothermic polymerization will occur in the presence of water, amines and alcohol

 

Hazardous decomposition

None

 

 

 

 


 

 

Section 11– Toxicological Information

 

Product toxicity data : Acute oral LD50〉5000mg/kg(rat) Acute dermal LD50〉2000mg/kg(rabbit)

 

Carcinogen status

 

Hazardous component

NTP Carcinogen

IARC Carcinogen

OSHA

Ethyl Cyanoacrylate

7058-85-0

NO

NO

NO

Carbon Black

1333-86-4

NO

Group 2B

Yes

 

 

 

Literature Referenced Target Organ & Other Health Effects

 

Health Effects Hazardous

Health Effects/Target Organs

Ethyl Cyanoacrylate

Allergen, Irritant, Respiratory

Carbon Black

Respiratory, Some evidence of carcinogenicity

 

 

Section 12– Ecological Information

 

Ecotoxicity

No data available

Persistence/Degradability

No data available

Bioaccumulative Potential

No data available

Mobility in Soil

No data available

 

 

 

Section 13– Disposal Consideration

 

Information provided is for unused products only.

Recommended method of disposal in accordance with Federal, State and local regulation

Not a RCRA hazardous waste

Section 14– Transport

INTERNATIONAL AIR TRANSPORT ASSOCIATION (IATA) :

 

 

This product is not classified as dangerous goods , by the rules of IATA.

 

.S Department of transportation (DOT) Shipping regulations:

This product is not classified as dangerous goods, per U.S. DOT regulation under 49 CFR 172.101.

Proper shipping name : MEGA X( glue for false eyelashes) Hazard Class number and description : Not applicable.

UN identification number : Not applicable. Packing group : Not applicable.

Section 15– Regulatory Information

Cyanoacrylate Korean regulation

Industrial  Safety  and  Health:  Hazardous  Chemical  management  .Dangerous  Material  Safety

management.

United State Regulatory Information

TSCA 8 (b) Inventory Status : All components are listed or are exempt from listing on the Toxic

Substances Control Act Inventory TSCA 12(b) Export Notification : None

CERCLA/SARA Section 302 EHS : None

CERCLA/SARA  Section  311/312  :  Immediate  Health  Hazard,  Delayed  Health  Hazard,  Fire.

Reactive

CERCLA/SARA 313 : None

California Proposition 65 : No California Proposition 65 listed chemical are known to be present Canada Regulatory Information

All components are listed on or are exempt from listing on the Domestic Substances List WHMIS Hazard class : B.3, D.2.B

 

Section 16– Other Information

 

DISCLAIMER:

All the information of Material Safety Data Sheet is provided on the basis in good faith, and is believed to be trustworthy but is for reference only. Adhesive is very complicated and the result of it much dependent on the surface material, additive, releasing agents of the substrates and the user's methods. Our company assumes no responsibility for use or reliance upon this information.  The users are responsible for selecting the suitability of the products and methods of use.

 

 

 

You may also like


Recently viewed