Halo Adhesive

Regular price$40.00
Tax included. Shipping calculated at checkout.

Halo adhesive is a lash artist’s best friend. It’s been tested in multiple humidities and worked great for all of us! one word: Halo is one of our favourite adhesives, it works well for either classic or volume.

Halo is a quick-curing adhesive, curing at 0.5-1 second. It’s one of our best adhesives for low humidity. This adhesive work best in humidity between 20-45% and temperature 20-24 C. it’s a good choice for lash artist who want a fast-drying adhesive.

Halo is a clear adhesive that is suitable for clients that are sensitive to Carbon Black.


 Product details:

  • 5ml bottle
  • Retention – Approx. 3-5 weeks
  • Viscosity: medium
  • Humidity 20% to 60%
  • Drying time: 0.5-1 second
  • Colour: clear
  • Shelf life - opened: 4-6 weeks, unopened 6 months
  • Cruelty free never tested on animals
  • Ingredients: Ethyl-2 Cyanoacrylate, PMMA, Isobutylene/ Isoprene Copolymer
  • Latex free
  • 100% vegan

 Recommended environment:

Ideal Temperature: 20-24 C

Under 50% humidity: 1 second cure time

50% to 75% humidity: 0.5 second cure time

Over 75% humidity: please use a dehumidifier

 Storage recommendations:

  • Store in cool, dark container with a silica packet to reduce humidity
  • Unopened adhesive is good for 6 months.
  • Opened adhesive is last up to 4-6 weeks. under proper storage conditions
  • Shake for two minutes before using

 Warning: this product is intended for professional use only. Do not use this adhesive for self-application or to apply strip lashes.

Liquid products, inclusive adhesive cannot be returned. If you are not happy with your adhesive please contact our customer service via email at admin@envolash.com.au.



MSDS |MATERIAL SAFETY DATA SHEET                               

Section 1 – Chemical Product and Company Identification










Creation date: 05/01/2023

15 Peerless Court

Avondale Heights

Victoria 3034 Australia

0415 217 186

Product use: Adhesive glue for eyelash extension only.



Section 2 – Composition and Ingredient Information


Ingredient Component Name


CAS Number 7085-85-0

Concentration 90%


Isobutylene/Isoprene Copolymer

CAS Number 9010-85-9

Concentration 4%



CAS Number 9011-14-7

Concentration 5%













Section 3 – Hazards Identification   

Hazard Risk Classification


Category 1

Potential Health Effect

Eye: Irritating to eyes. Causes excessive tearing. Eyelids may bond.


Skin: Bonds skin in seconds. May cause skin irritation. Cyanoacrylate has been reported to cause allergic reactions but due to rapid polymerization at the skin surface, an allergic response is rare. Cyanoacrylates generate heat on solidification. In rare circumstances a large drop will burn the skin. Cured adhesive does not present a health hazard even if bonded to the skin.

Inhalation: Exposure to vapors above the established exposure limit result in respiratory irritation which may lead to difficulty in breathing and tightness in the chest




Section 4 – First Aid Measures



Remove to open space with fresh air. Seek medical attention to treat symptomatically if discomfort persist


Eye Contact

Flush with water for at least 15 minutes. Get medical attention. If eyelids are bonded closed, release eyelashes with warm water by covering with a wet pad. Do not force your eyes open. Cyanoacrylate will bond to eye p\rotein and will cause a lachrymatory effect which will help to debone.


Skin Contact

Soak in warm soapy water. Gently peel apart using a dull instrument. If skin is burned due to the rapid generation of heat by a large drop, seek medical attention. If lips are bonded, apply warm water to the lips and encourage wetting and pressure from saliva in the mouth. Peel or roll lips apart. Do not pull lips apart with direct opposing force.


Ingestion is not likely. See supplemental page for emergency procedures.





Section 5 – Fire Fighting Measures


Specific Hazard


Flash Point

125℃ Tagliabue closed cup


Auto Ignition temperature



Flammable/Explosive Limits-lower%

Not determined


Flammable/Explosive Limits-upper%

Not determined


Hazardous Decomposition Materials

Carbon Monoxide, Carbon Dioxide


Suitable Extinguishing Media

Dry powder. Foam and Water spray. Carbon dioxides


Protective Equipment

Fire fighters should wear positive pressure self-contained breathing apparatus


Hazardous combustion products

Trace amounts of toxic and or irritating fumes may be released and the use of breathing apparatus is recommended.


Unusual fire or explosion hazard





Section 6 – Accidental Release Measures


Environmental precautions

Ventilate Area


Disposal and Clean Up

Do not use clothes for mopping up. Flood with water to complete polymerization and scrape off the floor. Cured material can be disposed of as non-hazardous waste



Section 7 – Handling and Storage


Handling Precautions

Avoid contact with eyes, skin, and clothing. Avoid breathing of vapors



Keep in a cool, well ventilated area away from heat

Section 8 – Exposure Controls and Personal Protection

Engineering Controls

Use positive down-draft exhaust ventilation if general ventilation is insufficient to maintain vapor concentration below established exposure limits.


Respiratory Protection

Use NIOSH approved respirator if there is potential to exceed exposure limits. Observe OSHA regulations for respiratory use (29 CFR 1910.134)


Skin Protection

Use gloves and aprons as necessary to prevent contact. Do not use PVC, nylon or cotton.


Eye/Face protection

Chemical splash goggles or safety glasses with side shields.




Section 9 – Physical and Chemical Properties


Physical State

Colorless Liquid


Sharp ,irritation



Boiling Point

More than 300OF

Flash Point

125Tagliabue closed cup



Evaporation Rate(Ether=1)


Ignition Temperature


Melting/Freezing Point



Polymerized by water

Vapor Density

Approximately 3

Vapor Pressure

Less than 0.2mm


Section 10 – Stability and Reactivity



Stable under recommended storage conditions


Conditions to Avoid

Spontaneous polymerization


Incompatible Materials

Water, amines, alkalis and alcohols



Rapid exothermic polymerization will occur in the presence of water, amines and alcohol


Hazardous decomposition








Section 11– Toxicological Information


Product toxicity data : Acute oral LD50〉5000mg/kg(rat) Acute dermal LD50〉2000mg/kg(rabbit)


Carcinogen status


Hazardous component

NTP Carcinogen

IARC Carcinogen


Ethyl Cyanoacrylate





Carbon Black



Group 2B





Literature Referenced Target Organ & Other Health Effects


Health Effects Hazardous

Health Effects/Target Organs

Ethyl Cyanoacrylate

Allergen, Irritant, Respiratory

Carbon Black

Respiratory, Some evidence of carcinogenicity



Section 12– Ecological Information



No data available


No data available

Bioaccumulative Potential

No data available

Mobility in Soil

No data available




Section 13– Disposal Consideration


Information provided is for unused product only.

Recommended method of disposal in accordance with Federal, State and local regulation

Not a RCRA hazardous waste

Section 14– Transport




This product is not classified as dangerous goods , by the rules of IATA. U.S Department of transportation (DOT) Shipping regulations:

This product is not classified as dangerous goods, per U.S. DOT regulation under 49 CFR 172.101.

Proper shipping name : Volume X

Hazard Class number and description : Not applicable. UN identification number : Not applicable.

Packing group : Not applicable.


Section 15– Regulatory Information

Cyanoacrylate Korean regulation

Industrial  Safety  and  Health:  Hazardous  Chemical  management  .Dangerous  Material  Safety


United State Regulatory Information

TSCA 8 (b) Inventory Status : All components are listed or are exempt from listing on the Toxic

Substances Control Act Inventory TSCA 12(b) Export Notification : None

CERCLA/SARA Section 302 EHS : None

CERCLA/SARA  Section  311/312  :  Immediate  Health  Hazard,  Delayed  Health  Hazard,  Fire.


CERCLA/SARA 313 : None

California Proposition 65 : No California Proposition 65 listed chemical are known to be present Canada Regulatory Information

All components are listed on or are exempt from listing on the Domestic Substances List WHMIS Hazard class : B.3, D.2.B


Section 16– Other Information



All the information of Material Safety Data Sheet is provided on the basis in good faith, and is believed to be trustworthy but is for reference only. Adhesive is very complicated and the result of it much dependent on the surface material, additive, releasing agents of the substrates and the user's methods. Our company assumes no responsibility for use or reliance upon this information.  The users are responsible for selecting the suitability of the products and methods of use.


You may also like

Recently viewed