Flex is a quick-curing adhesive, curing at 0.5-1 second. It’s designed for advance lash artist. Flex could achieve up to 6-7 weeks retention. Flex never fails to set the stage in any environment - from high Humidity (75%) all the way down in to low 20%.

Flex is made from UK and meet all the strict EU cosmetic regulation. As the result flex has very minimal fumes and stays fresh much longer before needing a new drop during your appointment.

The treated bottle prevents fumes from being emitted, increasing the shelf life and safety of the adhesive. With high quality, clean raw materials and improved formula over other leading brands, Flex sets out to be the best lash adhesive on the market.

 

Product details:

• Made from UK
• UK and EU registered compliant
• 5ml bottle
• Retention – Approx. 6-7 week
• Viscosity: Thin
• Drying time: under 0.5-1 second
• Colour: Black
• Fumes: minimal
• Shelf life - opened: 90 days, unopened :1 year
• Cruelty free never tested on animals
• Latex free
• Ingredients: Ethyl-2 Cyanoacrylate, Trimethylolpropane Triacrylate, Butrylated Hydroxyanisole, Carbon Black
• 100% vegan

 Recommended environment:

Ideal Temperature: 20-24 C

Optimal humidity is 20% to 75% (higher humidity = quicker cure, lower humidity = slower cure)

 Storage recommendations:

• Store in cool, dark container with a silica packet to reduce humidity
• Unopened adhesive is good for 1 year. Please do not refrigerate or freeze it
• Opened adhesive is last up to 3 months under proper storage conditions
• Shake for two minutes before using.

 Warning: this product is intended for professional use only. Do not use this adhesive for self-application or to apply strip lashes.

Liquid products, inclusive adhesive cannot be returned. If you are not happy with your adhesive please contact our customer service via email at admin@envolash.com.au

MSDS

MSDS |MATERIAL SAFETY DATA SHEET                                                   

Section 1 – Chemical Product and Company Identification

MSDS NAME COMPANY NAME	Flex Adhesive ENVOLASH PTY LTD
COMPANY ADDRESS     PHONE	15 Peerless Court Avondale Heights Victoria 3034 Australia 0415 217 186
Creation Date: 05/01/2023 Product use: Adhesive glue for eyelash extension only

 

Section 2 – Composition and Ingredient Information

 

Ingredient Component Name

Ethyl-2-Cyanoacrylate                          CAS No: 7085-85-0          50-100%

Trimethylolpropane triacrylate          CAS No: 15625-89-5             <0.9%

Butylated Hydroxyanisole                   CAS No: 25013-16-5              <0.1%

Carbon Black                                           CAS No: 1333-86-4              0.1-1%

 

 

Section 3 – Hazards Identification  

 

Hazard Risk Classification	Classification of the ingredients according to (EC) No. 1272/2008 (CLP):  CAS No: 7085-85-0: Skin irrit. 2, H315, Eye irrit. 2, H319, STOT SE 3, H33 CAS No: 15625-89-5: Skin irrit. 2, H315, Skin sens. 1 H317, Eye irrit. 2, H319 CAS No: 25013-16-5: Aqua chron. 2, H411
	Eye: Irritating to eyes. Liquid or high vapor concentration can cause pain and irritation with slight corneal injury possible   Skin:  Prolonged or repeated skin contact can cause irritation and dermatitis through defatting of skin. Prolonged contact can result in skin absorption   Inhalation: May cause respiratory tract irritation.   Ingestion: Can cause burning of nose and throat.

Section 4 – First Aid Measures

 

Inhalation	Supply fresh air; consult a doctor in case of complaints.
Eye Contact	Rinse open eyes for several minutes under running water then consult a doctor.
Skin Contact	Immediately wash with water and soap and rinse thoroughly.
Ingestion	Consult a doctor immediately.

 

Section 5 – Fire Fighting Measures

 

Specific Hazard	N/A
Flash Point	N/A
Auto Ignition temperature	N/A
Flammable/Explosive Limits-lower%	N/A
Flammable/Explosive Limits-upper%	N/A
Hazardous Decomposition Materials	N/A
Suitable Extinguishing Media	Carbon dioxide, sand. DO NOT USE WATER.
Protective Equipment	Wear a self-contained respiratory protective device.
Hazardous combustion products	N/A
Unusual fire or explosion hazard	N/A

 

Section 6 – Accidental Release Measures

 

Environmental precautions	Do not allow products to reach the sewage system or any water course.
Disposal and Clean Up	Allow to solidify. Pick up mechanically. Ensure adequate ventilation
Personal Precautions	Protective equipment and emergency procedures Ensure adequate ventilation

 

Section 7 – Handling and Storage

 

Handling Precautions	Store in a cool, dry place in tightly closed receptacles. Keep away from heat and direct sunlight. Ensure good ventilation/exhaustion at the workplace. No special measures required about fire and explosion protection.
Storage	Store in a cool location. Store only in the original receptacle. Store away from oxidizing agents. Keep the container tightly sealed.

Section 8 – Exposure Controls and Personal Protection

Engineering Controls	The usual precautionary measures are to be adhered to when handling chemicals. Keep away from foodstuffs, beverages and feed. Immediately remove all soiled and contaminated clothing Avoid contact with the eyes and skin
Respiratory Protection	Not necessary if the room is well-ventilated. Use a suitable respiratory protective device in case of insufficient ventilation.
Skin Protection	The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer.  For penetration time, the exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed. Rubber Gloves and PVC gloves are not suitable.
Eye/Face protection	Face shield and safety glasses Use equipment for eye protection tested and approved under appropriate government standards.

 

 

 

Section 9 – Physical and Chemical Properties

 

Physical State	Liquid
Odour	Irritating
pH	N/A
Specific Gravity	N/A
Boiling Point	N/A
Flash Point	N/A
Flammability	N/A
Evaporation Rate(Ether=1)	N/A
Ignition Temperature	NA
Melting/Freezing Point	N/A
Solubility	Polymerised
Vapour Density	N/A
Vapour Pressure	N/A
Volatile Organic Compound(EPA Method24)	N/A

 

Section 10 – Stability and Reactivity

 

Stability	Stable under recommended storage conditions
Conditions to Avoid	Avoid exposure to exothermic polymerisation. Reacts with alcohol. Reacts with alcohols, amines, aqueous acids and alkalis. Reacts with water and acids. Reacts with amines. Reacts with water.Reacts with alkali (lyes).
Incompatible Materials	N/A
Hazardous Polymerization	N/A
Hazardous decomposition   Note: Possibility of hazardous reactions-exothermic polymerisation	No decomposition if used according to specifications.

Section 11– Toxicological Information

Primary routes of entry: Inhalation (Yes), skin (Yes), Ingestion (Yes)

Effects of overexposure: On the skin: Irritant to skin and mucous membranes. On the eye: Irritating effect. Sensitisation: Sensitisation possible through skin contact. The product shows the following dangers: irritant / May cause an allergic skin reaction / Skin Sensitivity.

Ethyl cyanoacrylate: LD50  Oral at >5000 mg/Kg (CICAD (2001))

Ethyl cyanoacrylate: LD50 Dermal >2000 mg/Kg (CICAD (2001))

Trimethylolpropane triacrylate: LD50 Oral >5000 mg/Kg

Butylated hydroxyanisole: LD50 Oral 2,200 - 5,000 mg/kg

 

 

 

Section 12– Ecological Information

 

Ecotoxicity	Do not allow undiluted product or large quantities of it to reach groundwater, water course or sewage system.
Persistence/Degradability	No data available
Bioaccumulative Potential	No data available
Mobility in Soil	No data available

 

Section 13– Disposal Consideration

                                                               

WASTE DISPOSAL:

Must not be disposed of together with household garbage. Do not allow products to reach the sewage system.

HAZARDOUS WASTE NUMBERS: N/A

 

Section 14– Transport

                                                                                                                                      

DOMESTIC (D.O.T.)

DOT_HAZARD: Void

SHIP_NAME: Void

 UN/NA: Void                                      

 LABELS: NONE

MARINE POLLUTANT NONE                                             

INTERNATIONAL (I.M.O.)

DOT_HAZARD: Void

SHIP_NAME: Void

UN/NA: Void

     

Section 15– Regulatory Information

This safety data sheet complies with the regulatory requirement

 

Section 16– Other Information

DISCLAIMER:

All the information of Material Safety Data Sheet is provided on the basis in good faith, and is believed to be trustworthy but is for reference only. Adhesive is very complicated and the result of it much dependent on the surface material, additive, releasing agents of the substrates and the user's methods. Our company assumes no responsibility for use or reliance upon this information.  The users are responsible for selecting the suitability of the products and methods of use.